VMware Certified Professional on vSphere 5
Question No: 101 – (Topic 3)
Click the Exhibit button.
For the selected item, what two properties could the storage administrator use to create a zone? (Choose two.)
Answer: A,D Explanation:
Fibre channel adapter and target needs to be used to create a zone.
Question No: 102 – (Topic 3)
A new LUN has been provisioned to all hosts in a vSphere5.x cluster. On one host a new VMFS datastore has been created.
How will the new datastore be discovered by the other ESXi 5.x hosts?
A rescan of all host bus adapters is periodically performed by ESXi hosts to detect new VMFS datastores.
New VMFSvolumes are automatically added to members of a cluster by vCenter 5.
A manual refresh is required on each ESXi 5.x hosts to discover new VMFS datastores.
A refresh of all host bus adapters is periodically performed by ESXi hosts to detect new VMFSdatastores.
Answer: C Explanation:
You need to manually refresh every ESXi 5.x host to get it to discover newly added VMFS datastores.
Question No: 103 – (Topic 3)
The storage administrator has recommended testing the performance benefits of jumbo frames and enabled jumbo frames on the storage array. The VMware administrator has enabled jumbo frames on the VMkernel port used for the software iSCSI initiator.
What other two components must be modified to enable jumbo frames support for the software iSCSI initiator?(Choose two.)
The physical switch
The port group
The software initiator
The virtual switch
Question No: 104 – (Topic 3)
What is the default VFAT scratch partition size for ESXi 5.x when installed on a USB drive?
Reference:http://blogs.vmware.com/vsphere/2011/09/booting-esxi-off-usbsd.html(see bulleted # 3)
Question No: 105 – (Topic 3)
What is one requirement when adding an extent to a VMFS datastore?
A new unused NFS mount
An RDM with sufficient space available
An unused iSCSI or FCP LUN
Free space on the LUN holding the VMFS datastore
Answer: C Reference:http://kb.vmware.com/selfservice/microsites/search.do?language=en_USamp;cmd= displayKCamp;externalId=1017662
Question No: 106 – (Topic 3)
How can you verify that vStorage APIs for Array Integration (VAAI) functionality is enabled for a storage array in a vSphere 5.x implementation?
VAAI will be reported on the Hard Disk properties page for any VMDK stored on a compliant array
Hardware Acceleration will be reported on the Hard Disk properties page for any VMDK stored ona compliant array
Supported will be listed in the VAAI column for any datastore created on a compliant array
Supported will be listed in the Hardware Acceleration column for any datastore created on a compliant array
Question No: 107 – (Topic 3)
When designing a storage infrastructure to support ESXi 5.x hosts what limit will be reached first?
Maximum number of NFS datastores
Maximum number of iSCSI LUNs
Maximum number of paths to an iSCSI RDM
Maximum number of iSCSI paths on a host
Answer: C Explanation:
When the storageinfrastructure is designed to support ESXi 5 hosts, the number of path to an iSCSI RDM are reaches its limit first.
Question No: 108 – (Topic 3)
Which is the most secure method of connecting to an iSCSI storage array using an independent hardware iSCSI adapter?
Answer: A Explanation:
If you’re thinking two direction CHAP authentication would be the most secure, you would probably be right EXCEPT the question was about an independent hardware iSCSIadapter. As per the VMware pubs page: “Independent hardware iSCSI supports CHAP only at the initiator level.” which means One-way CHAP.
Question No: 109 – (Topic 3)
Which are the correct parameters to specify when adding an iSCSI target to an ESXi 5.x host using the Static Discovery tab?
iSCSI server ip address, port 902
iSCSI server ip address, port 3260
iSCSI server ip address, port 902, iSCSI target name
iSCSI server ip address, port 3260, iSCSI target name
Answer: D Reference:http://kb.vmware.com/selfservice/microsites/search.do?language=en_USamp;cmd= displayKCamp;externalId=1008083
Question No: 110 – (Topic 3)
An administrator decides to implement a Fixed multipathing policy for an ESXi 5.x host with four available paths to one VMFS datastore. After the policy has been enabled for the datastore, how many paths will have an active status by default?
Answer: A Explanation:
When the policy has been enabled for the datastore, 4 paths will have active status by default.
100% Ensurepass Free Download!
–Download Free Demo:VCP510PSE Demo PDF
100% Ensurepass Free Guaranteed!
–Download 2018 EnsurePass VCP510PSE Full Exam PDF and VCE
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|