Which command should you issue first to configure EIGRP for IP?
A. ip eigrp routing
B. router eigrp process-id
C. ip eigrp autonomous-system-number
D. router eigrp autonomous-system-number
Correct Answers: D
Which statement is true about the implementation of IPv6 in an already existing IPv4 network?
A. IPv6 can be routed using the same routing protocol versions as IPv4
B. A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route them.
C. IPv4 and IPv6 networks can be routed simultaneously.
D. Only OSPF version 3 can be utilized for routing IPv4 and IPv6.
Correct Answers: C
Which statement is correct about OSPFv3?
A. Authentication is supported through IPSec.
B. Neighbor discovery has been enhanced over OSPFv2 to allow multiple adjacencies.
C. Multiple DRs are allowed on a broadcast segment.
D. Point-to-multipoint mode is no longer an option for interfaces.
Correct Answers: A
Refer to the exhibit. What statement is true about the configuration output?
A. Updates that are received from BGP neighbor 192.168.28.1 and that pertain to network 10.30.0.0/16 will be preferred over the default local preference settings.
B. Updates that are going to BGP neighbor 192.168.28.1 and that pertain to network 10.30.0.0/16 will be sent with a local preference value of 110.
C. Traffic that is coming from 10.30.0.0/16 will be routed through BGP neighbor 192.168.28.1 if all other BGP neighbor connections maintain their default metrics.
D. If all other BGP neighbor connections maintain their default settings, traffic that is coming from 10.30.0.0/16 will not prefer the path through BGP neighbor 192.168.28.1.
Correct Answers: A
Refer to the exhibit. A network administrator has configured DHCP services on the router as shown. DHCP clients connected to the FastEthernet0/0 interface are working properly. DHCP clients connected to the FastEthernet0/1 interface are not receiving addresses. Which two statements contain recommendations that will solve the problem? (Choose two.)
A. The ip helper-address 10.0.0.1 command should be issued so that the address can be added to the FastEthernet0/0 configuration.
B. The ip helper-address 10.0.0.1 command should be issued so that the address can be added to the FastEthernet0/1 configuration.
A. C.A second DHCP pool for network 10.10.0.0/24 should be configured.
C. The network shown in the output under the ip dhcp pool Central command should be changed to network 10.10.0.0 with a mask of 255.255.255.0.
D. An ip dhcp excluded-address global configuration command for network 10.10.0.0/24 should be issued.
Correct Answers: CE