Cisco CCNP 642-902 Exam 10

Ensurepass

QUESTION
ACME Rocket Sleds is growing, and so is their network. They have determined that they can no longer continue using static routes and must implement a dynamic routing protocol. They want to have data use multiple paths to the destinations, even if the paths are not equal cost. Which routing protocol has the ability to do this?

A. EIGRP
B. OSPF
C. RIPv1
D. RIPv2
E. BGP
F. IS-IS

Correct Answer: A

QUESTION 42
Refer to the exhibit.

ROUTE Enterprises has many stub networks in their enterprise network, such as router B and its associated network. EIGRP is to be implemented on router A so that neither the prefix for the S/0/0/0 interface nor the prefixes from router B appear in the routing tables for the router in the enterprise network. Which action will accomplish this goal?

A. Declare router B a stub router using the eigrp stub command.
B. Use the passive-interface command for interface Serial0/0/0.
C. Use a mask with the network command to exclude interface Serial0/0/0.
D. Implement a distribute list to exclude the link prefix from the routing updates.

Correct Answer: C

QUESTION 43
Refer to the exhibit.

Which statement about dynamic routing protocols for this network is true?

A. No dynamic interior routing protocol can summarize as shown.
B. Unless configured otherwise, EIGRP would automatically summarize the prefixes as shown in the exhibit.
C. With this IP addressing scheme, EIGRP can be manually configured to summarize prefixes at the specified summarization points.
D. The IP address design lends itself to OSPF. Each summarizing router would be an ABR, summarizing to the next area in the address hierarchy.

Correct Answer: C

QUESTION 44
After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C.

The following output is shown:

What can you conclude about this network?

A. The network has been stable for at least the last 45 minutes.
B. There is a flapping link or interface, and router C knows an alternate path to the network.
C. There is a flapping link or interface, and router A does not know an alternate path to the network.
D. EIGRP is not working correctly on router C.
E. There is not enough information to make a determination.

Correct Answer: A

QUESTION 45
After implementing EIGRP on your network, you issue the show ip eigrp traffic command on router C.

The following output is shown:

Moments later, you issue the same command a second time and the following output is shown:

Moments later, you issue the same command a third time and the following output is shown:

What information can you determine about this network?

A. The network is stable.
B. There is a flapping link or interface, and router C knows an alternate path to the network.
C. There is a flapping link or interface, and router C does not know an alternate path to the network.
D. EIGRP is not working correctly on router C.
E. There is not enough information to make a determination.

Correct Answer: B
Ensurepass offers the Latest 2013 642-902 Exam PDF to pass the exams.